line shafting मीनिंग इन हिंदी

उदाहरण वाक्य

1. One mid 19th century factory had 1, 948 feet of line shafting with 541 pulleys.
2. Between the late 19th and mid-20th centuries, individual electric motors at each lathe replaced line shafting as the power source.
3. Unlike the Shay, Heisler's design did not have a continuous string of line shafting running the length of the engine.
4. In early factory electrification only large motors were available, so new factories installed a large motor to drive line shafting and millwork.
5. Corliss engines were typically used as stationary engines to provide mechanical power to line shafting in factories and mills and to drive dynamos to generate electricity.
6. During the Industrial Revolution, mechanized power generated by water wheels or steam engines was transmitted to the lathe via line shafting, allowing faster and easier work.
7. In many cases the entrepreneur would rent a floor of a mill which was served by line shafting powered by a steam engine somewhere else in the building.
8. This was an industrial safety campaign, part of the larger Progressive Movement, to get headless set screws onto the pulleys and shafts of the line shafting that was ubiquitous in factories of the day.
9. The electrical motors were housed in an attached projecting tower and the mill was powered by a group drive system, each electrical motor driving a group of machines via line shafting " .  Historic England Records
10. Prior to the widespread use of electric motors small enough to be connected directly to each piece of machinery, line shafting was used to distribute belts, pulleys and gears known as " millwork ".